^ yes you can
Made some adjusters tonight for table....shitty update but it happened
![]()
^ yes you can
Made some adjusters tonight for table....shitty update but it happened
![]()
Even the build table has a build! Love it!Keep it coming!
Quick update had some time before heading out to a Xmas party.
Cut some sheet metal using the build table as a straight edge for the electric shears
So I'm boxing in my rockers to give body more strength and help when it's on build table
Got out the bead roller and made some designs
Bent a 90 on the bottom edge hard to see in picture. So it can attach at bottom of rocker
Put in place next is to weld em in
![]()
Last edited by briangodecki; 12-13-2014 at 03:57 PM.
Got some welding done on the rocker inner I made.
Cut the outer rockers back so there flush
Lowered car back down on top of 2x3 metal. The 3 inches will be my rocker to ground clearance. Everything else will be above that point.
![]()
Inner rockers look good! loving the bead rolling work.
Thanks haven't really used it yet on anything. Just gotta make sure your paying attention where the edge is cause you can get a wobbly line pretty easy if rushing
Did some more measurements tonight . Made sure the body was square to table and then made sure the fenders and hood were still fitting with how body was.
Then got the main frame rails down and rear crossmember tacked in place.
Lots of measuring and lots of prepping metal . One thing about chromoly and tig welding is joints need to be perfect fit and everything clean clean.
![]()
Didn't get to work on car tonight
Just couple bars put in place for floor
![]()
Im thinking this build needs to be done in short videos not pics.
Well I guess bring out the film crew light and sound guys and lets make a you tube channel. or add me on snapchat for live updates and random dick drawings
way to sell me on snapchat lol
What's your snapchat Brian?
Godecki
Put a cable down centr of build table.
Something better to measure off of.
Tonight took measurements and bent main hoop up.
![]()