Have an account? Register

Forgot your password?

Forgot your username?

Results 1 to 4 of 4

Thread: Need to borrow Torque Wrench. 100FTLB

  1. #1
    Senior Member test Tremblay's Avatar
    Join Date
    Mar 2012
    Location
    Tbay
    Posts
    797

    Need to borrow Torque Wrench. 100FTLB

    Hey everyone,

    I am looking to borrow a 3/8" drive torque wrench. Doing a few torques on my engine between 25-75 foot pounds.

    The teeth on my torque wrench let go and I am waiting on parts from Snap On

    I am located in PA near the county fair area.

    Thanks,
    ALL THE HONDAS!!!

  2. #2
    Senior Member test
    Join Date
    Mar 2012
    Location
    Thunder Bay
    Posts
    424

    Re: Need to borrow Torque Wrench. 100FTLB

    I have a 1/2" and 3/8" drive torque wrenches you can borrow. 3/8"s only goes to around 32lbs/ft and the 1/2" goes significantly higher.
    Quote Originally Posted by VRsuper6
    the inards of the VR is actually filled with babies getting punched in the face repeatedly. this is where the sound comes from, sweet sweet infantile punishment.



  3. #3
    Senior Member test Tremblay's Avatar
    Join Date
    Mar 2012
    Location
    Tbay
    Posts
    797

    Re: Need to borrow Torque Wrench. 100FTLB

    ^I am used to 3/8" ones going up to 100ftlbs :p

    As long as I can find a 1/2" to 3/8" adapter in my garage because my 12pt sockets are 3/8"

    I pm'd you.

    Thanks,
    ALL THE HONDAS!!!

  4. #4
    Senior Member test Tremblay's Avatar
    Join Date
    Mar 2012
    Location
    Tbay
    Posts
    797

    Re: Need to borrow Torque Wrench. 100FTLB

    Thread can be deleted.

    Thanks
    ALL THE HONDAS!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •