Have an account? Register

Forgot your password?

Forgot your username?

Results 1 to 13 of 13

Thread: Cleaned up the engine bay & added some parts

  1. #1
    Senior Member KrOMESTANG's Avatar
    Join Date
    May 2012
    Location
    T.Bay
    Posts
    240

    Cleaned up the engine bay & added some parts

    Ive been working on it for a couple months. Here are some pics and a list of some of the parts installed this year. I added a before pic to show some work done this year.

    chromoly tube k-member
    *** control arms
    *** rear inner bumper bar
    coil over kit with drag coils (front)
    zex wet nitrous black out kit with window switch and purge
    lightweight black russell fuel line and fittings
    lightweight sway bar
    Bama tuner chip
    corbeau 5 point harness
    front skinnies to match my rear slicks
    mcleod hydraulic clutch kit
    ford racing billet steel flywheel
    fidanza v2 clutch (puck style)
    rpm launch control
    heat wrap the exhaust
    10.5mm taylor wires n heat guards
    Black MSD dist.cap

    did a bit of a wire tuck and some more weight reduction through the rest of the car too. aiming for 2750lbs race weight.
    Last edited by KrOMESTANG; 05-14-2014 at 07:49 AM.

  2. #2
    Senior Member Bocherks1's Avatar
    Join Date
    Mar 2012
    Location
    Thunder bay
    Posts
    232

    Re: Cleaned up the engine bay & added some parts

    Looks good bud. Will it be out this year at all?>
    Go fuck yourself San Diego

  3. #3
    Senior Member KrOMESTANG's Avatar
    Join Date
    May 2012
    Location
    T.Bay
    Posts
    240

    Re: Cleaned up the engine bay & added some parts

    too funny just asked you the same thing. Yeah ill def be out this summer. mostly racing but i should get a few cruises in too

  4. #4
    Senior Member neeman77's Avatar
    Join Date
    Mar 2012
    Location
    Thunder Bay, Ontario
    Posts
    335

    Re: Cleaned up the engine bay & added some parts

    Looks good, nice work!
    Neema

    9.75 @ 143.41 MPH

    923 hp 735 ft/lbs

    In-Car Video Link

  5. #5
    Senior Member KrOMESTANG's Avatar
    Join Date
    May 2012
    Location
    T.Bay
    Posts
    240

    Re: Cleaned up the engine bay & added some parts

    Quote Originally Posted by neeman77 View Post
    Looks good, nice work!
    Thanks!!

    couple more pics plus I got the car fired up last night. wont be long now

  6. #6
    Moderator Yota's Avatar
    Join Date
    Mar 2012
    Location
    Ontario
    Posts
    912

    Re: Cleaned up the engine bay & added some parts

    Nice!
    97 LS 240SX LS376/525hp
    97 Supra 863whp 756wtq - 10.22 @ 142.9mph
    90 Castrol Celica Alltrac 600awhp 571awtq (track car)
    92 Toyota Pickup Lexus V8 supercharged 400hp? TBA

  7. #7
    Senior Member KrOMESTANG's Avatar
    Join Date
    May 2012
    Location
    T.Bay
    Posts
    240

    Re: Cleaned up the engine bay & added some parts

    Quote Originally Posted by Yota View Post
    Nice!
    Thank!!

  8. #8
    Senior Member KrOMESTANG's Avatar
    Join Date
    May 2012
    Location
    T.Bay
    Posts
    240

    Re: Cleaned up the engine bay & added some parts

    Almost done! Just needs a few finishing touches. Took it for a rip last week. Feels like she should put down some good times @ the races

  9. #9
    Senior Member exist's Avatar
    Join Date
    Mar 2012
    Location
    Nova Scotia
    Posts
    1,532

    Re: Cleaned up the engine bay & added some parts

    This car needs a photoshoot

  10. #10
    Senior Member Canadiotica's Avatar
    Join Date
    Mar 2012
    Location
    Thunder Bay
    Posts
    411

    Re: Cleaned up the engine bay & added some parts

    Car is looking so great man. Looks like a lot of man hours went into this build.

  11. #11
    Senior Member KrOMESTANG's Avatar
    Join Date
    May 2012
    Location
    T.Bay
    Posts
    240

    Re: Cleaned up the engine bay & added some parts

    Quote Originally Posted by Canadiotica View Post
    Car is looking so great man. Looks like a lot of man hours went into this build.
    Thanks! sure does have a lot of wrench time in on her with lots more planned for the future

    exist, a photo shoot wouldn't be a bad idea might have to work that out some time.

  12. #12
    Senior Member
    Join Date
    Feb 2014
    Location
    thunder bay
    Posts
    552

    Re: Cleaned up the engine bay & added some parts

    Quote Originally Posted by tecumseh View Post
    <removed> carburetors are the simple carburetors which require cleaning as the other all other carburetors. The fuel reaches to its pipeline through a rubber tube from the boiler and goes through the needle valve and stores it in the metal bowl. Since the petrol or any other fuel fills the bowl, it stops the fuel. for more details visit us at:<removed link>
    X2 COULDN'T HAVE SAID IT BETTER MYSELF......KEEP THAT IN MIND ON THIS BUILD STEVE
    Last edited by MarcGSR; 07-02-2014 at 08:11 AM. Reason: removed link

  13. #13
    Senior Member KrOMESTANG's Avatar
    Join Date
    May 2012
    Location
    T.Bay
    Posts
    240

    Re: Cleaned up the engine bay & added some parts

    that's not random @ all....

Similar Threads

  1. Nissan's New Nismo Engine!
    By Snidd in forum General
    Replies: 7
    Last Post: 02-02-2014, 02:49 AM
  2. New posts getting added to last post.
    By dorkage in forum Site Suggestions, Help, Errors
    Replies: 11
    Last Post: 06-19-2012, 06:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •